Speakz D-TC
Gold Signature

Housing – Natural sound reproduction

The housing is surface treated with Ansuz Signature coating. This coating is ensuring an absolutely natural sound reproduction. The Ansuz Signature coating is applied to the housing in a HiPIMS (High Power Impulse Magnetron Sputtering) process, and creates the finest, and most uniform layers of zirconium and tungsten followed by a layer consisting of aluminium titanium nitride and finally a layer of zirconium.

Connectors

Golden connection.
The connectors are made of gold-plated pure copper.

Conductors

Carefully settled signal handling.
The conductors are made of shielded silver-plated copper.

The Tesla coil principle

The key operating principle of the Ansuz Tesla coil is to have two coils wound in opposite directions – one coil and one counter coil. In Ansuz words, this is called “A double inverted coil”. The two coils both carry voltage, and when one of the Tesla coils encounters a voltage spike, a counter spike is activated to eliminate the noise. Since noise spikes are pure voltage carrying virtually no charge, the cancelation is quite good, but not perfect. Adding more Tesla coils in parallel, increases the noise cancellation and the perceived blackness in the music increases significantly along with the purity and clarity of the sound. Ansuz uses various types of Tesla coils, as their individual properties ideally complement and reinforce each other.

Analog dither technology 3rd generation

Analog dither technology originates in radar, where it ensured a stronger signal and thus greater range. The active Tesla coils send pulsating signals at precisely defined frequencies. These signals are sent in anti-phase. This significantly amplifies the musical signal and eliminates the background noise floor.

Analysis, studies, and many hours of listening, have resulted in new options – and a lot of listening has resulted in this 3rd generation design which is a further optimization of the most effective frequencies which opens the soundscape even more and with the tiniest details when it comes to reproduction of the recordings.

Active zirconium Tesla coil

Based on Ansuz general curiosity on the properties of different materials, Ansuz has implemented a zirconium bar in their anti aerial resonance coil design. This is another impressive upgrade to the Ansuz anti aerial resonance coil technology.

The properties of this zirconium bar allow for unprecedented resonance control resulting in outstanding musical refinement that creates a natural soundstage, unrivalled in its purity, precision and attention to musical detail.

Anti aerial resonance coil technology

Prevents airborne noise.
All cables and cable shields act as antennas for unwanted airborne sound waves (RF noise), which impairs the clarity of the authentic audio signal. The Anti Aerial Resonance coil protects the signal from absorbing the airborne RF Noise. This noise is absorbed in the coil and eliminated in the countercoil. The AARC splits the length of the cable into undefined lengths. As a result, the cable is less likely to absorb RF noise, which no longer can bleed into the audio system as annoying ‘white noise’.

Double inverted helix coil

Lowest induction.
Ansuz DIHC technology reflects a key advancement in audio technology and is employed in most of Ansuz cable types. Based on this technology, we wind and configure our audio cables. The idea behind this technology is to ensure the lowest possible induction. When the coil and the counter coil are closely wound in a double helix pattern, induction can be significantly reduced.

Active square Tesla coil

Embedded efficiency.
The active square Tesla coils are embedded in our printed circuit boards – a coil on the top and the counter coil on the back. The principle is exactly the same as the active Tesla coil and thus has a greater ability to eliminate noise than the passive Tesla coils.